CF-100+ Epoxy grout

Chennai Paints– CF-100+ Epoxy Grout is a three component epoxy grout consisting of Resin, Hardener and Filler for filling joints of tiles. It is stain and chemical resistant and is a long-lasting grout, easy to clean, UV & abrasion resistant for beautiful tiles it is waterproof, crack-free, stain-free epoxy tile joint filler. This epoxy tile joint filler can be used to fill grout between ceramic, porcelain, vitrified tiles, natural stones, glass mosaics, and other surfaces. CF-100+ epoxy tile joint filler is perfect for grouting surfaces such as bathrooms, kitchens, living rooms, swimming pools, and commercial areas since it can be used in both dry and wet regions. This epoxy-based waterproof tile joint filler has high abrasion, impact, and shock resistance.

Description

Colourfill -CF-100+ Epoxy Tile grout is a factory proportioned pre-measured 3- component epoxy grout kit unit consisting of three conveniently packed components with Hardener As (Part A), Resin As (Part B), and colored filler powder as (Part C).

  • 100% Stain free and abrasion-proof
  • Strong and durable
  • Withstands extensive Chemical and temperature resistant
  • Anti-bacterial and anti-fungal
  • Very easy to clean, Delivers superior washability
  • Optimal for wet areas

Working Properties

Working Properties of Colourfill – CF-100+

  • Pot life 45 minutes
  • Foot traffic 24 hours
  • Heavy traffic 72 hour

Packaging

Available in 1 and 5 kg packs

Surface Preparation

  • Before starting to grout, remove debris in grout joints and lightly sponge the tile surface to remove dust and dirt.
  • Do not clean tiles with acid cleaners. In case acid cleaners were used to clean the tiles, ensure to wash the area with plenty of water before starting the grouting.
  • Substrate temperature must between 60°F (16°C) and 90°F (32°C).

Mixing

  • Empty entire contents of Colourfill- CF-100+ Grout Part “A” and Part “B” into a Dry clean container for mixing.
  • Mix with a margin trowel or a slow speed drill mixer until Part- A and B are completely blended. Add at least ¾ of Chennai Paints CF-100+ Tile joint Part “C” Filler Powder and mix to a uniform consistency.
  • Add the remaining filler powder and mix to achieve a stiff mix to work into the Tile joints.
  • Immediately empty the entire contents of bucket onto working area. Use a Clean dirt free plastic sheet as a drop cloth. Use standard epoxy grouting method to work with CF-100+ tile joints.
  • CF-100+ Tile joint can also be applied with a caulking gun. Make sure all grout joints are packed full.
  • Remove as much excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tiles. Mechanical cleaning may be necessary if cleaning is delayed.

Cleaning 

Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90° angle and pull it diagonally across the joints and tile to avoid pulling out the material.

Cleaning Stage Description
stage-1 After 30-45 min of the application of the grout, scrub the surface of the tile & joint with clean water and the scrubber provided in the pack to remove any excess grout. Then take a clean thick white towel and drag it across the tile to remove any residue.
stage-2 Within 24 hours, do a second cleaning with normal soap detergent to remove any haze from the tile.

Coverage

 

Tile Size x Thickness
Measured in MM
100x100x3
150x150x4
200x150x5
150x300x6
300x300x6
450x300x7
600x450x8
600x600x8
600x900x11
900x900x12

Joint Width Measured in MM
2 MM 3 MM 4 MM 5 MM 6 MM 8 MM 10 MM 12 MM
52 36 27 22 19 19 12 10
59 40 30 24 20 20 13 11
53 36 27 22 19 19 12 10
52 35 26 21 18 18 11 9
78 52 39 31 26 26 16 13
80 53 40 32 27 27 17 14
101 67 50 40 33 33 20 17
118 78 58 47 39 39 23 20
103 68 51 41 34 34 21 17
118 77 58 46 39 39 23 19

*Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity

Shelf Life

Factory sealed containers of this product are guaranteed to be of first quality for Eighteen (18) Months if stored in a cool, dry and well ventilated location away from source of ignition and fire at temperatures >32°F (0°C) and <110°F (43°C).

Note

  • Chances of Light colors Tile Joints may darken slightly due to direct UV exposure.
  • Not recommended for industrial applications exposed to high concentrations of food and mineral acids and to high heat
  • We do not recommend CF-100+ tile joint for soft, polished marble or delicate glazed tiles.
  • Adhesives / mastics / mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproof membranes
Open chat
Hello 👋