Surfaces+ Premium Interior Emulsion Paint

Chennai Paints – Surfaces+  Premium Emulsion provides a rich looking smooth and matt finish to the wall as its is Acrylic Based  enhancing  the beauty of the wall for years . due to its unique  Stain resistant technology it delays stains from penetrating further into the paint film and can be wiped clean easily as its anti-bacterial property aids to inhibit growth of certain bacteria  that protects your walls that can cause considerable damage . It has a Long lasting film that keeps your house as good as new for a years.

Advantages

  • Enhances paint life
  • Superior Hiding
  • Stronger Adhesion for paint system
  • Smoother Finish
  • No Curing
  • No chalking
  • Good sealing properties
  • Washability- High

Application

PLASTER

New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

Cleaning

Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use a good quality Exterior Sealer.

In case of Cracks,dents and holes use Chennai Paints Acrylic Wall Putty or white cement based and fine sand in the ratio 1:3.

Filling For Cracks, Holes & Dents

In case of Cracks,dents and holes use Chennai Paints Acrylic Wall Putty or white cement based  and fine sand in the ratio 1:3.

Application Process

  • Step-1 Sanding – Rub with sand paper lightly scraping off previous coatings of loose dust, dirt particles making the surface smooth. ( Sand the Surface With Sand Paper- 180 And Wipe Clean )
  • Step-2 -Primer –Apply Chennai Paints Superprime Wall primer—Water based( Brush/Roller/Spray ) Recoating to be done after 4 – 6 HRS
  • Step-3 Putty – Apply Chennai Paints Acrylic Wall Putty – Water based – Recoating to be done after 6 – 8 HRS
  • Step 4 -Sanding Sand The Surface With Sand Paper 180 And Wipe Clean
  • Step 5 -Primer – Apply Chennai Paints Superprime Wall Primer- Water based-( Brush /Roller /Spray ) Recoating to be done after 4 – 6 HRS
  • Step-6 Sanding – Sand The Surface With Sand Paper 220 And Wipe Clean
  • Step 7 – Apply 1st Coat of Surfaces+ Premium Emulsion –Water Based ( Brush /Roller /Spray ) Recoating to be done after 3 – 4 HRS
  • Step 8 – Apply 2nd Coat of Surfaces+ Premium Emulsion-Water Based ( Brush /Roller /Spray )

(Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.)

Coverage

On normal masonry surface after brushing- 1 Coat covers – 150 – 170 sq.ft/ltr and 2 coat covers 75 – 85 sq.ft/lt

(Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity)

 

Note-

Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application. Do not over-thin or over-extend the brush. Always Tint using machine colourants only ( Never use Universal Stainers ) Stir well and strain before use. Tinted paints need thorough shaking immediately after tinter addition as well as before use.

Technical Details

Nature

Free Flowing Liquid

Colour

Milky white (Base Paint)

Dilution Ratio

10% by volume with clean and portable water

Drying Time

4-6 hrs hard dry, 20-30 minutes surface dry depending on climatic condition

Sheen Level

Smooth & Matt

Shelf Life

16-18 Months from the date of manufacture in original company’s tightly    Sealed packing away from direct sunlight and excessive heat.

Application

By Brush/Spray/ Roller

Packing

18 ,9 ,3.6  & 0.900  litre containers. ( Base paints )

Open chat
Hello 👋